Sections


Main-Menu

header image

Technical Interview & Viva Questions : KyaPoocha.com

Enter your email address to subscribe now :

  

Effect of Adaptive Array Processing on GPS Signal Crosscorrelation




GET JOB ALERTS IN YOUR INBOX : CLICK HERE!

Adaptive space-time arrays can be used to cancel jammers interfering with GPS receiver operation. However, there is a concern that the adaptive filter used for jammer cancellation can distort the GPS signal crosscorrelation function, especially if a non-constrained jammer cancellation algorithm, such as power minimization, is used. We have examined this issue via both experimentation and simulation. The experiments were conducted using a seven-channel linear array that has five adaptive time taps per channel. A jammer waveform is injected into each channel, thus, simulating a broadside jammer minus antenna effects. When a power minimization algorithm was used for jammer cancellation, it was found that significant distortion of the crosscorrelation function would be encountered for signals incident on the array from a significant portion of the upper hemisphere around the jammer location. Simulations confirmed these results. Simulations alone were then used to assess the performance of a CRPA with 11 adaptive time taps/element. Strong jammers were placed on the horizon and the crosscorrelation function calculated for various angular locations of GPS satellites. It was found that for this configuration and with 11 adaptive time taps/element (rather than only 5) the crosscorrelation distortion was not as severe, and significant errors were confined to a relatively small solid angle around the location of each jammer.

Download Full Presentation

Get Latest Fresher Jobs in your Inbox :   



Related Articles :


Register for free on eBay.in!

Leave a Comment

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Shaadi.com Matrimony - Register for FREE